item no.
36148000
Silicone mould U-shaped ribbed candle
8.4x3.9cm, height 8.6cm, box 1pc
- Free shipping from €0.00
- Klimaneutraler Versand mit DHL GoGreen
- Sicherer Kauf auf Rechnung
- 30 Tage Geld-Zurück-Garantie
- Kostenlose Abholung beim Händler
- Kostenlose Rückgabe
Productdetails
Silicone casting mould „Kerze U-Form geriffelt“, 8.4 x 3.9 cm, 8.6 cm high, including the metal wick holder.
The casting mould is made of high-quality silicone, extremely elastic, dimensionally stable and frost- and heat-resistant (from -40°C to +240°C). Perfect for casting with wax. The mould is suitable for all types of wax, maximum wax quantity 155 g.
Application:
Prior to casting, the mould must be clean, dust-free and dry. Use a pointed object to pierce a small hole in the bottom of the silicone casting mould and pull the wick through the resulting hole. Put the mould on a stable, level surface. Put the metal wick holder over the opening of the mould, then insert and fix both wick ends in the holes of the wick holder. Melt the wax in a bain-marie, dye it if desired and pour it into the mould. Let it dry thoroughly out. Remove the wick from the wick holder. After demoulding, clean the mould with water and some dishwashing detergent; it retains its shape and can be reused. Detailed instructions are included in the package.
TIP:
The pack does not contain a wick. We recommend ordering the flat wick FD19 (item no.31589000) together with this pack. Sufficient for several candles.
The casting mould is made of high-quality silicone, extremely elastic, dimensionally stable and frost- and heat-resistant (from -40°C to +240°C). Perfect for casting with wax. The mould is suitable for all types of wax, maximum wax quantity 155 g.
Application:
Prior to casting, the mould must be clean, dust-free and dry. Use a pointed object to pierce a small hole in the bottom of the silicone casting mould and pull the wick through the resulting hole. Put the mould on a stable, level surface. Put the metal wick holder over the opening of the mould, then insert and fix both wick ends in the holes of the wick holder. Melt the wax in a bain-marie, dye it if desired and pour it into the mould. Let it dry thoroughly out. Remove the wick from the wick holder. After demoulding, clean the mould with water and some dishwashing detergent; it retains its shape and can be reused. Detailed instructions are included in the package.
TIP:
The pack does not contain a wick. We recommend ordering the flat wick FD19 (item no.31589000) together with this pack. Sufficient for several candles.
Share product: 
