Nupsi placeholder Easter egg

The Nupsi placeholders Easter Egg have a thickness of 4 + 10 mm and can be applied when casting with PET + silicone casting moulds of Rayher. They are designed to suit the Wooden Easter eggs (item no.64665505) and veneer wood Easter eggs (item no.46784505) of Rayher. Once combined, new trendy Easter decorative items arise.

16 Easter egg shaped moulds of the following dimensions:
2 pieces of each – 6.2 x 8.3 cm / 5 x 6.7 cm / 3.2 x 4.2 cm / 10 mm thick
2 pieces of each – 6.2 x 8.3 cm / 5 x 6.7 cm / 4 mm thick
3 pieces of each – 3.2 x 4.2 cm / 2.4 x3.2 cm / 4 mm thick

And this is how is done:
Affix the placeholder in the mould at the desired spot using the double-sided adhesive tape, pour in the casting compound, let it dry, then demould the resulting casting and remove the placeholder with e.g. a sharp needle. If necessary, you can polish up the edges with sandpaper. The resulting recess can now be decorated according to your creative imagination.

You’ll need in addition: PET casting mould, casting material (e.g. white Raysin 200 or black Raysin 250, creative-cement 5-in-1, jewellery concrete), double-sided adhesive tape, needle and sandpaper.