Mosaic Ceramica

Give your garden table a new appearance with mosaic stones Ceramica, design flower pots, give a simple wooden tray this little "out of the ordinary" style, decorate your mirror with an oriental mosaic frame - the possibilities are limitless. The shape of mosaic stones Ceramica are purposely not cut precisely out, the heights vary slightly and the surface varies from stone to stone. Slight differences in colour and the unvarnished surface underline the natural character of this series. The bucket contains approx.780 stones/800 g measuring 1x1 cm. This is sufficient for an area of approx. 30 x 30 cm. They can be used e.g. on concrete, metal, wood, paper-mâché, glass, etc. Mosaic stones Ceramica can be cut with scissors, are frost-resistant and suitable for outdoor use. The ceramic tesserae can be broken with hammer or grozing pliers. Attention, stones can have sharp edges! Fragments of different sizes often make the mosaic works particularly attractive. In order to preserve these fragments, the tesserae are broken with special tools. That’s how it works: draw any motif on the surface of your choice, you can also use a stencil. First lay out your motif, then glue the individual stones onto the surface with mosaic glue. Allow it to dry well out! Spread the mixed mosaic-joint sealant over the mosaic pattern. Remove the joint sealant from the stones by wiping them with a damp sponge. Additional material required: joint sealant (1460100), frost-resistant mosaic glue (3338500), spatula and sponge, possibly hammer or grozing pliers. Recommended: grozing pliers for mosaic (2722200).