Yarn bracelet with decorative element

Craftideas
Yarn bracelet with decorative element

Difficulty

Duration

60 min

Download Idea as PDF

Share Idea

Instructions in 4 steps Gold and natural paired together: the optimal combination for your vintage style bracelet.

Besides the articles listed below, you also need: Ruler, tinfoil, large pin, wooden skewer

And this is how it works:

Step 1

Cut 2 pieces of cotton yarn, each 20 cm long. Untwist one piece of yarn so that you obtain three crimped strands. Tie these strands separately by laying them right next to one another to the larger gold metal flat ring.

Step 2

Untwist the other piece of yarn as well. This time, string the pinkish- gold metal bead onto the strand. To facilitate the stringing, coat the end of the fluffy strand with jewellery glue and shape it with your fingers to get a pointed tip. Once the glue has dried out, you can easily string the bead on. Tie the entire strand to the opposite side of the ring with the metal bead facing upwards. Attach the metal decorative element in the middle of the tied yarns at each side of the ring using the two flat round pliers.

Step 3

Check the length of the bracelet by putting it around your wrist. Take the clasp into account and cut off the yarn evenly. Put some glue for jewellery onto the ends of the strands and join them together between two fingers so that each end-point fits into the jewellery connector. For a better grip, apply some more glue for jewellery.

Step 4

Insert it so that the closed side is on the back of the bracelet. Now close the jewellery connector by means of the flat round pliers. Use the small rings to attach the magnetic clasp to the ends.