
Instructions in 10 steps A fir tree is an inescapable part of the winter and Christmas season. With black yarn and a wire tree template, you can easily create special decorative pendants.
Besides the articles listed below, you also need: Crayon, white, Aluminium foil, Cardboard
And this is how it works: 1 ![]()

Step 1
Cut a total of 40 strands (10 cm each) from the Braidy Recycling yarn. You will need 20 cm later for the hanger.2 ![]()

Step 2-1
Lay each piece of yarn twofold and thread the ends of the yarn through the resulting loop.3 ![]()

Step 2-2
Tighten well the resulting knot on the wire tree.4 ![]()

Step 2-3
Tighten well the resulting knot on the wire tree.5 ![]()

Step 3
Attach all 40 strands in this way.6 ![]()
Step 4
Put the wire tree on the cardboard with aluminium foil. Make sure that the strands are lying next to each other.7 ![]()

Step 5-1
Then coat the yarns on one side with the textile stengthener.8 ![]()

Step 5-2
Allow to dry thoroughly out.9 ![]()
Step 6
When the wire tree is dry and has solidified, take a round object with a diameter of about 9 cm, e.g. a glass, and trace its contour with the white crayon. Cut it out with the fabric shears.10 ![]()
