Soap „Bonjour“ with Buddha

Craftideas
Soap „Bonjour“ with Buddha

Difficulty

Duration

60 min

Download Idea as PDF

Share Idea

Instructions in 8 steps Even after the green colouring, your soap bar remains see-through. The basis is namely the transparent soap bar.

Besides the articles listed below, you also need: Stove, melt, melting pot, scale, small plastic container, craft stick as a stirrer or teaspoon, tablespoon

And this is how it works:

Step 1

Melt the transparent creative-soap in a water-bath on the stove (max. 60° - do not boil).

Step 2

Stir 2 drops of the mint-green soap colour in 2/3 of the liquid soap. Therefore, use a craft stick or a teaspoon.

Step 3

For the soaps with motif or logo, place upwards the label with the stamping.

Step 4

To avoid blistering or slipping of the label, use at best a tablespoon with which you fill the casting mould with the liquid soap.

Step 5

Fill 2/3 of your soap casting mould with the liquid soap and let the soap cool down until a sort of curd forms on the surface. You can pour thereon your remaining white soap. Let the soap dry well out (at least 2-3 hours, ideally one day).

Step 6

Demould the soap by a slight pressure. Remove the label at best with a pointed object e.g. a needle.

Tip: Let the finished soap dry at best for 2-3 weeks; the longer it ripens, the firmer becomes.

Step 7

Depending on the temperature and airiness, the soap can perspire. We therefore recommend to wrap the soap after its demoulding in a transparent foil for flowers (cellophane).

Step 8

Clean the soap casting mould and the pots with hot water.

Craft Idea Soap „Bonjour“ with Buddha