
Instructions in 9 steps For a matching look to the winter season. Filigree snowflakes knotted and tied with natural yarn.
Besides the articles listed below, you also need: Aluminium foil, Cardboard
And this is how it works: 1 ![]()

Step 1
Cut out 16 × 0.50 m of Braidy recycling yarn.2 ![]()

Step 2
Lay the yarns twofold and pull the closed end through the metal ring. Pull the ends of the yarn through the resulting loop. Attach all strands to the decorative ring.3 ![]()

Step 3
Pin the decorative ring to the cork base by means of the pearlized head straight pin.4 ![]()

Step 4
With 4 cords, tie a reef knot. 2 reef knots under each other and 8 next to each other.5 ![]()

Step 5
Then tie together half of each of the two knots with reef knots and do not tighten them too tightly.6 ![]()

Step 6
Finally, tie together the half of the two knots with reef knots again. Do not tighten them too tightly.7 ![]()

Step 7
Finish with half a reef knot and complete the row.8 ![]()

Step 8.1
Now cut the cords off, except for 2 pieces, which are later used to form the hanger. Put the snowflake on the cardboard with aluminium. Then coat the snowflake with the textile stengthener.9 ![]()
