Snowflake, black

Craftideas
Snowflake, black

Difficulty

Duration

60 min

Download Idea as PDF

Share Idea

Instructions in 6 steps

Besides the articles listed below, you also need: Aluminium foil, Cardboard

And this is how it works:

Step 1

Cut out 20 × 0.50 m of Braidy recycling yarn.

Step 2

Lay the yarns twofold and pull the closed end through the raw wood ring. Pull the ends of the yarn through the resulting loop.

Step 3

Attach all strands to the raw wood ring. Pin the raw wood ring to a cork base by means of the pearlized head straight pin.

Step 4

With 4 cords, tie a reef knot. For the first row, you need 10 reef knots.

Step 5

For the 2nd and 3rd row, tie together half of each of the two knots to the reef knots and do not tighten them too tightly.

Step 6

Now cut the cords off, except for 2 pieces, which are later used to form the hanger. Put the snowflake on the cardboard with aluminium. Then coat the snowflake with the textile stengthener. Allow to dry thoroughly out.

Craft Idea Snowflake, black