Macramé tree small

Craftideas
Macramé tree small

Difficulty

Duration

180 min

Download Idea as PDF

Share Idea

Instructions in 6 steps Easy-peasy braiding. Braidy yarn is simply wound around the metallic framework. And this is how it works:

Step 1

Insert the metal tree into the wooden base. First cut 2 × 10 m pieces out of Braidy Recycling yarn and wind each one in a clew.

Step 2

Now knot firmly a piece of yarn at the top of the fir tree to the outer right metal rod and affix the knot with craft glue. Also knot the second yarn at the top of the fir tree to the outer left metal rod and affix the knot with craft glue too.

Step 3

Then start with the right side. Wrap the yarn around the outer right metal rod from the outside to the inside 4 times, then pass the yarn between the outer and the middle metal rod to the back and wrap it around the middle metal rod 2 times. Now pass the yarn between the middle and the right outer metal rod to the back. Now put the yarn down.

Step 4

Now start with the left side. Wrap the yarn around the outer left metal rod from the outside to the inside 4 times, then pass the yarn between the outer and the middle metal rod to the back and wrap it around the middle metal rod 2 times. Now pass the yarn between the middle and the left outer metal rod to the back and then put the yarn down. Keep on holding tension on the yarn.

Step 5

Then start again with the right side. Wrap again the yarn around the outer right metal rod from the outside to the inside 4 times, then pass the yarn between the outer and the middle metal rod to the back and wrap it around the middle metal rod 2 times. Now pass the yarn between the middle and the right outer metal rod to the back and then put the yarn down. Keep on holding tension on the yarn.

Step 6

So continue working by alternating the right and the left sides. Finally, knot each yarn and affix it with craft glue, then let it dry out and cut off all ends.

Craft Idea Macramé tree small