Layered necklace, gold

Craftideas
Layered necklace, gold

Difficulty

Duration

30 min

Download Idea as PDF

Share Idea

Instructions in 13 steps Necklaces with stacked layers - a trend that is interpreted here quite elegantly in gold and with a bead or a rhinestone pendant. And this is how it works:

Necklace 1

Link chain with Rhinestone pendant, gold

Step 1

To hang up the gold Rhinestone pendant, you need 1 small oval ring. Open the small oval ring by means of the two flat round pliers. Hold the small ring firmly with one of the flat round pliers while the slot of the small ring is pointing upwards.

Step 2

Now open the small ring backwards with the second pair of pliers. Hang up the Rhinestone pendant and the link chain centrally. Close the small oval ring with both pliers. Hang the other Rhinestone pendant in the same way at a distance of about 2.5 cm.

Necklace 2

Link chain with Coin pendant, gold

Step 1

To hang up the Coin pendant (with 1 eyelet), you need 1 small round ring of 4.2 mm and 1 small oval ring. Open the small round ring of 4.2 mm by means of the two flat round pliers for jewellery. Hold the small ring on its right side with the flat round pliers while the slot of the small ring is pointing upwards.

Step 2

Now use the second pair of pliers to open the small ring backwards on its left side and hang up the Coin pendant with 1 eyelet. Close the small round ring of 4.2 mm by means of both flat round pliers.

Step 3

Now hang up the small ring with the Coin pendant onto the small oval ring and fasten it in the middle of the link chain.

Step 4

Hang up one Coin pendant with 1 eyelet each and a small round ring on the right and the left side by means of a small oval ring at a distance of about 4 cm.

Step 5

The Coin pendants with 2 eyelets should be hung up at the same distance of about 4 cm. To do this, shorten the link chain with the side cutter to the desired length.

Step 6

Attach the link chain and the Coin pendant with 1 oval ring on each side. Then hang up another Coin pendant with 1 eyelet on both sides at a distance of about 4 cm (as described above).

Necklace 3

Bead chain with World Map, gold

Step 1

To hang up the pendants (Waxed Bead and World Map), you need 1round ring of 4.6 mm. Open the small ring by means of the two flat round pliers. Hold the small ring firmly with one pair of pliers while the slot of the small ring is pointing upwards, then open the small ring backwards by means of the other pair of pliers.