Lamella pendant lamp Hello

Craftideas
Lamella pendant lamp Hello

Difficulty

Duration

120 min

Download Idea as PDF

Share Idea

Instructions in 5 steps The white lamella lamp made of wood provides your home with a Scandinavian look.

Besides the articles listed below, you also need: Tinfoil, Kitchen roll, Light source, Sellotape

And this is how it works:

Step 1

First, paint only on one side, with a brush, the individual lamellas and the wooden rings of the lamella lamp with the white Chalky Finish paint. Let them dry well out. Then, paint also the other side and let them again dry well out.

Step 2

Fix the lettering HELLO and SUNSHINE on each painted lamella each by means of the sellotape strip. Make sure that you put the lettering in the right place on the lamp. The package instructions are helpful for mounting and hanging up the lamp.

Step 3

Now, stencil the desired words onto the painted lamellas by means of the stenciling brush and the ebony Chalky Finish paint. Use little paint on the brush. This will prevent paint from leaking under the stencil.

Step 4

Use also the ebony Chalky Finish paint for the narrow edges of the lamella lamp. Apply again a little paint to the brush, so that no excess paint can run off the edge.

Step 5

After drying, put the lamella lamp together. Put the painted lamellas together according to the package instructions and, if necessary, stick them together by means of the adhesive pen. Finally, mount the lamp socket and screw in a suitable light source.

Craft Idea Lamella pendant lamp Hello