Faceted luminous ball

Craftideas
Faceted luminous ball

Difficulty

Duration

30 min

Download Idea as PDF

Share Idea

Instructions in 5 steps Insert strung beads and feathers into the plastic ball halves. The LED lights make the decorative balls glow.

Besides the articles listed below, you also need: 2 button cells, felt-tip marker

And this is how it works:

Step 1

Spray the inner side of one plastic ball’s half with the Chalky Finish Spray. Let it dry thoroughly (at least one hour).

Step 2

Thread alternately a star-shaped spangle and a wax bead on and fix them by threading again the wire through the respective hole. Leave always a distance of about 5cm between the wax bead and the star-shaped spangle.

Step 3

Then wrap the silver wire e.g. around a felt-tip marker (the diameter of about 8mm), take it off once again and pull the whole a bit apart.

Step 4

Fill only the white ball’s half with decorative feathers, the micro LED-fairy lights and finish with the threaded piece of wire. Wrap the fairy lights around the crosspiece and close the ball.

Step 5

Attach the washi-tape „Love“ as a banner and decorate the ball with the decorative feather, a star-shaped spangle and a wax bead. If necessary, fix it with a hot glue.