Instructions in 3 steps Concrete décor is particularly remarkable for its flawless even look. The bunny made of concrete is therefore particularly suitable for your contemporary Easter decoration.
Besides the articles listed below, you also need: Cooking oil, Plastic container, Kitchen roll, Scales
And this is how it works: 1 ![]()
Step 1
Grease the mould. Fill the plastic container with about 60 g of water and then gradually add 600 g of the creative-cement. Stir the mixture until an uniform and castable compound is obtained.2 ![]()
Step 2
Pour the mixture slowly into the prepared mould. Make sure you don’t pour up to the top of the mould! Tap slightly against the mould several times with your fingers, so that potential air bubbles can escape upwards. Let it dry out overnight. The next day, you can remove the bunny from the mould by turning the casting mould over and by pressing slightly several times with the palm of your hand against the casting mould until the bunny becomes entirely detached from the mould. If necessary, tap slightly the casting mould onto a soft surface.3 ![]()