Instructions in 12 steps Wood, beads of natural colour shades crowned with golden accents: the emblematic colours of the trendy Boho style. These bracelets round off your outfit with an ethnic twist.
Cut 30 cm long piece off the Magic-stretch thread and string beads of your choice onto the thread by means of the special needle for threading beads.
The chosen amount of beads should loosely encircle your wrist. Make sure that the bracelet is long enough to fit around your wrist, then knot its both ends with a double overhand knot
Affix the knot securely with the glue for jewellery using a wooden skewer.
Wind about 1.2 m long light beige cotton yarn 8 times around your four straight-closed fingers. Cut the thread off.
Insert the yarn bundle halfway into the ring of 8 mm. Put both ends together and stretch the threads down.
Use the remaining 30 cm of yarn to fasten the tassel with about 4-5 windings below the ring and with a double overhand knot.
Conceal both ends in the middle of the tassel by means of the special needle for threading beads.
Cut the tassel evenly to a length of about 2.5 cm.
Attach the suspension ring of the carabiner clasp as a connector between the carabiner and the tassel ring. To do this, use two pairs of pliers (pliers for jewellery and flat round pliers).
String the enclosed beads on the straight pin in the following order: Renaissance glass wax bead, raw wood ball, polished glass bead and finally the metallic Rocailles bead.
Bend the remaining free part of the straight pin into a loop by means of the pliers for jewellery.
Attach the suspension ring of the carabiner clasp as a connector between the carabiner and the bent loop. To do this, use two pairs of pliers (pliers for jewellery and flat round pliers).
Besides the articles listed below, you also need: Wooden skewer, ruler
And this is how it works: 1
Step 1
Bracelets:Cut 30 cm long piece off the Magic-stretch thread and string beads of your choice onto the thread by means of the special needle for threading beads.
Tip: When doing this, hold the thread end tightly!
2
Step 2
Bracelets:The chosen amount of beads should loosely encircle your wrist. Make sure that the bracelet is long enough to fit around your wrist, then knot its both ends with a double overhand knot
3
Step 3
Bracelets:Affix the knot securely with the glue for jewellery using a wooden skewer.
4
Step 4
Tassel pendant:Wind about 1.2 m long light beige cotton yarn 8 times around your four straight-closed fingers. Cut the thread off.
5
Step 5
Tassel pendant:Insert the yarn bundle halfway into the ring of 8 mm. Put both ends together and stretch the threads down.
6
Step 6
Tassel pendant:Use the remaining 30 cm of yarn to fasten the tassel with about 4-5 windings below the ring and with a double overhand knot.
7
Step 7
Tassel pendant:Conceal both ends in the middle of the tassel by means of the special needle for threading beads.
8
Step 8
Tassel pendant:Cut the tassel evenly to a length of about 2.5 cm.
9
Step 9
Tassel pendant:Attach the suspension ring of the carabiner clasp as a connector between the carabiner and the tassel ring. To do this, use two pairs of pliers (pliers for jewellery and flat round pliers).
10
Step 10
Raw-wood ball pendant:String the enclosed beads on the straight pin in the following order: Renaissance glass wax bead, raw wood ball, polished glass bead and finally the metallic Rocailles bead.
11
Step 11
Raw-wood ball pendant:Bend the remaining free part of the straight pin into a loop by means of the pliers for jewellery.
12
Step 12
Raw-wood ball pendant:Attach the suspension ring of the carabiner clasp as a connector between the carabiner and the bent loop. To do this, use two pairs of pliers (pliers for jewellery and flat round pliers).